Interior shot looking forward.  Lots of debris lying around.  Old floorboards were exterior plywood covered with faux wood flooring glued onto the floorboards.

Renault 16C Diesel.  Is with Alfred Holzer of Schooner Bay, WI. We have determined that trying to get the Renault running will not be a wise investment.  We will be putting a refurbed diesel, most likely a Yanmar into her.  Now we can clean under the motor, check the mounts, and give it a fresh coat(done the spring of 2011) of paint.

Port side of main cabin. All wood has been removed.  The lower boards (with door) all have water damage on the bottom 5-6" and will have to be replaced.

Starboard qtr. berth.  All cushions have mold and will need to be replaced.  Will try to salvage the covers if possible.

The 2 picts to the left reveal the mold in both qtr berths that needed to be removed.  A fresh coat of paint will follow.

Lots of scrubbing by Mark cleaned the qtr. berths of mold.  A few glass repairs and some paint will make her shine.

The head has a new look.  Painted the area a fresh white and installed a new Dometic Porti-Potty that is MSD ready, meaning it can be hooked up to a dockside pumpout.  Which is what I did.

All that grayish/black you see is mold and mildew.   A lot of scrubbing along with some bleach.

This area is the same as the image above but after being cleaned.  I have since covered with a coat of interior enamel.  Wow, does she shine.  Also have removed the wood to restore that also.

Removed white paint that was put on the nav station. Will finish with Honey Teak.


New look!  Show the nice oak finish under some Honey Teak.

Pict below is how the wood looks with Honey Teak.  Area is above the kitchen area.  Nice product.
 

Make a free website with Yola